SustainabilityEnvironment

Environmental ActivitiesAbout Environmental Measures

Our Company conducts product development in accordance with the ELV Directive, the RoHS Directive, and other relevant laws concerning environmental load substances. (Some products may contain regulated substances that are exempt from applicability.) Contact us for details concerning the status of applicability with specific laws and regulations.

  • Aluminum Electrolytic Capacitors
  • Multilayer Ceramic Capacitors
  • Film Capacitors
  • Metal Oxide VaristorsTNR™
  • Nanocrystalline/Amorphous/Dust Choke Coils
  • Supercapacitors DLCAP™

About compliance with the REACH regulation.

In accordance with the content of the REACH Handbook (Guidance on requirements for substances in articles, published May 2008), electronic components we manufacture are goods with no intentional emissions and are not applicable to the "Registration" as defined under EU REACH Regulations Article 7, Section 1.

ReferenceStudy on EU REACH Regulations Concerning Electrolytic Capacitors, Electrolytic Capacitors Workgroup (published March 13, 2008)

About compliance with the REACH regulation.

About China RoHS

Information disclosure based on China RoHS Article 13

Aluminum Electrolytic Capacitors

About environmentally-compliant products

We engage in international initiatives for environmental load substance reduction and abide by international regulations (RoHS Directive, ELV Directive, etc.) as part of efforts to develop and commercialize products with a low environmental load. In accordance with revisions to the RoHS Directive (2011/65/EU), four new substances were added to the scope of applicability. As a result, as of July 2019, 10 substances are applicable to regulations. We have already reviewed our external sleeve materials and completed measures to ensure compliance.

RoHS2 compliance Compliance with 2011/65/EU and said revisions (2015/863/EU, etc.)
ELV compliance Compliance with 2000/53/EC and said revisions (2016/774/EU, etc.)
Details of our response measures
1.Lead wire (Plating)
Category Plating material on lead wires
Conductive Polymer Aluminum Solid Capacitors Resin-Molded SMD Type Sn
SMD Type Sn-Bi
Radial Lead type Sn
Conductive Polymer Hybrid Aluminum Electrolytic Capacitors SMD Type Sn-Bi
Radial Lead type Sn
Aluminum non-solid electrolytic capacitors SMD Type case code : B55 to JA0 Sn-Bi
case code : KE0 to MN0 Sn
Radial Lead type case dia : ~ ⌀8 Sn-Bi
case dia : ⌀10 ~ Sn
Snap-in type Sn
Screw Mount type Non-plated

Contact us if you desire substances other than the above-mentioned terminal plating substances.
(Note) Sn : Tin, Bi : Bismuth

2.Sleeve (Lead free)
Category Sleeve materials
Conductive Polymer Aluminum Solid Capacitors Resin-Molded SMD Type Sleeveless
SMD Type Sleeveless
Radial Lead type Sleeveless
Conductive Polymer Hybrid Aluminum Electrolytic Capacitors SMD Type Sleeveless
Radial Lead type Sleeveless
Aluminum non-solid electrolytic capacitors SMD Type Sleeveless
Radial Lead type PET
Snap-in type PET, PVC
Screw Mount type PVC
  • Please contact us if you desire materials other than the above-mentioned outer sleeve materials (There are certain sizes we are unable to provide).
    In principle, available colors of our PET sleeves are limited to black, brown, and dark blue. There are certain colors we are unable to provide so please contact us for details.
    Furthermore, the standard specification for snap-in type PVC-free components is to have "no resin plate" on the pressure valve side.
  • Contact us for information concerning available flame resistance grades for outer sleeves.

Multilayer Ceramic Capacitors

Important Announcement

Request for Switchover to RoHS Compliant Series in Our Multilayer Ceramic Capacitors