Products FAQs
Selected Tag: technicalterm
Bias characteristic refer to a phenomenon in which the effective capacitance of a ceramic capacitor changes when a voltage is applied.
- Tags
- TechnicalTerm
MSL stands for Moisture Sensitivity Level, and is one of the standards developed by JEDEC. It has been established with the aim of preventing a phenomenon in which the sealing resin used primarily in semiconductors and similar components absorbs moisture from the atmosphere, which vaporizes during processes such as reflow soldering. This causes volumetric expansion which can lead to damage.
The DC-internal resistance (DCIR) of supercapacitors is the measurement value for the internal resistance of the capacitor cell, and the direct current normally used for measurement.
- Tags
- TechnicalTerm
The leakage current (LC) of supercapacitors is the minuscule current that flows when the rated voltage continues to be applied to the capacitor.
- Tags
- TechnicalTerm
Supercapacitors energy density is the amount of energy per unit of volume that can be obtained from charged supercapacitors.
- Tags
- Formula
- TechnicalTerm
Supercapacitors capacitance is its ability to store electric charge, and is measured in farads (F).
- Tags
- Formula
- TechnicalTerm
There are three main mounting methods for capacitors. These are flow soldering (which is the most common), reflow soldering (which has become the mainstream in recent years), and press-fit (which does not use solder).
LC modules combine coils [L] and capacitors [C] into a modular package. They simplify board mounting and effectively reduce production costs.
The camera module Image Signal Processor (ISP), is the component which processes the image signal, or the integrated circuit that provides this functionality.
- Tags
- technicalterm
The camera module register refers to the storage area that is part of the integrated circuit. The output image can be controlled by setting the ISP register of the camera module.
- Tags
- technicalterm
Please contact us from the following, if you have any questions or inquiries not listed above.