FAQ/Contact us

Products FAQs

Selected Category:Multilayer Ceramic Capacitors > Electrical characteristics

When using multilayer ceramic capacitors, be careful not to apply a voltage in excess of the rated voltage. Please make sure that the sum of the DC voltage and peak voltage of the superimposed ripple current is less than the rated voltage.


We stipulate the rated ripple current values for our multilayer ceramic capacitors. The frequency range is 10 kHz to 1 MHz (the sine wave and ripple current Vp-p should be within the rated voltage).


Bias characteristic refer to a phenomenon in which the effective capacitance of a ceramic capacitor changes when a voltage is applied.


Please contact us from the following, if you have any questions or inquiries not listed above.

Products Inquiries