Products FAQs
Selected Category：Metal Oxide Varistors
AEC-Q200 is a test standard for certifying the reliability of passive components. It specifies the testing requirements and test quantities for each component.
- Tags
- Automotive
- AEC-Q200
Select a varistor voltage between wire and ground of 431K (430V) or more for TNR™ Ceramic Varistors.
Please use TNR™ Ceramic Varistors at a voltage that does not exceed the maximum allowable circuit voltage.
TNR™ ceramic varistors have a semi-permanent lifespan, when used within their rated usage temperature and circuit voltage and not subject to external stresses.
- Tags
- lifetime
As ceramic varistors deteriorate, their leakage current increases. The degree of deterioration can be determined by measuring current leakage.
- Tags
- lifetime
- malfunction
We can provide the Failures in Time (FIT value) and Mean Time To Failure (MTTF) for TNR™ Ceramic Varistors.
- Tags
- malfunction
- lifetime
Details about CQC certification can be found on the CQC website which you can reach by following the link at the bottom of the acquired safety standards on each individual product page.
- Tags
- safetystandard
Details about CSA certification can be found on the CSA website which you can reach by following the link below acquired safety standards on each individual product page.
- Tags
- safetystandard
Details about UL certification can be found on the UL website which you can reach by following the link below acquired safety standards on each individual product page.
- Tags
- safetystandard
Details about VDE certification can be found on the VDE website which you can reach by following the link below acquired safety standards on each individual product page.
- Tags
- safetystandard
Please contact us from the following, if you have any questions or inquiries not listed above.