Products LineupInductors (Coils)

Toroidal Differential Mode/Boost PFC Choke Coil BM series LBBM008121X8-V0E

  • RoHS2

LBBM008121X8-V0E

Large inductance compared to TM Series when electrical load is low. Magnetic flux leakage is small since the core has no gap.

Status
?
In Production:Product is in mass production.
NRND:Not recommended for new design.
To be Discontinued:We are planning to discontinue production of this item.
Discontinued:Production of this product has stopped.
Under development :Products under development. Listed product specifications are subject to change without prior notice.
In Production
Successor model -
Part number LBBM008121X8-V0E
Discontinued parts number
?
This is a discontinued part number system.
It may be described in safety standards, but please do not use it when ordering.
BM08121X8PBF
Series BM
Core material Amorphous(Non-Gap Type)
Core abbreviation X8
Applicable temperature range -40 ~ 130 ℃
Storage temperature -40 ~ 130 ℃
Inductance 280 μH / 0 A, 200 kHz (Reference data)
120 μH / 8 A, 200 kHz (Reference data)
Inductance Tolerance -25 % / 25 %
Rated current 8 A
Peak Current - A
D.C.R. 30 mΩmax.
Winding(mmφ - lines) ⌀1.3-1P Wire: PEW – Plating material: Sn-3Ag-0.5Cu
Rated voltage - V
Inductance Coefficient -- / -A, -kHz
-- / -A, -kHz
Rated Current Ampere Turn -AT
Magnetic Path Length -cm
Cross Sectional Area -cm²
Dimention D1 34mm
Dimention D2 34mm
Dimention W 24.5mm
Dimention l -mm
Dimention w -mm
Dimention h -mm
Dimention L 30mm
Dimention a 2mm max.
Dimention ⌀D -mm
Dimention ⌀d -mm
Dimention D -mm
Dimention ⌀ID -mm
Dimention H -mm
Dimention W -mm
Dimention P1 -mm
Dimention P2 -mm
Dimention P3 -mm
Dimention P4 -mm
Dimention P5 -mm
Dimention h1 -
Dimention h2 -
Standard mounting direction Vertical
Case type parts number
?
Both coating types (no case) and case types can be used.
Case types are recommended when the coils are used in a high-voltage circuit.
Please order case types with this parts number.
-
Insulation Type B
Flame resistance UL94-0
Reference weight
?
This is a representing value calculated from a standard material composition.
Note that the reference weights are not considered as guaranteed value.
56 g
Minimum order quantity
?
This is the packing quantity for standard packing specifications.
132 pcs/Box
Shelf life/MSL 12 months
RoHS2 Compliant Capable
AEC-Q200
?
Please refer to AEC-Q 200 for details.
-

Standard Mounting Direction

Zoom

Mounting Direction No pedestal Pedestal without pins Pedestal with pins
Vertical LBBM008121X8-V0E LBBM008121X8-D0E LBBM008121X8-Y0E
Horizontal LBBM008121X8-H0E N/A N/A

Even if it is not applicable (N/A), it may be applicable depending on the conditions. Please contact us.

Dimention [mm]

Dimention

Part numbering system

Part numbering system