Screw terminal type aluminum electrolytic capacitor mounting screw torque
The maximum allowed torque on terminal screws when mounting a screw terminal type aluminum electrolytic capacitor and the recommended torque when tightening metal mounting bands are as follows.
1. Maximum terminal screw torque
| Diameter (⌀) | Screw specifcations | Maximum screw tightening torque |
|---|---|---|
| ～⌀89 | Plus hexagon-headed screw M5×0.8×10 | 3.23 N・m |
| ⌀100 | Plus round small screw M8×1.25×16 Spring washer, flat washer |
6.31 N・m |
2. Recommended torque when tightening metal mounting bands.
0.78±0.05 N・m regardless of band or screw type.
Metal mounting band
If you have any questions or inquiries that do not apply to the above, please contact us at the following address.