LRF462715MKDX - Inductors (Coils/Cores) | Nippon Chemi-Con Corporation

Core/Reactor Core FW Series LRF462715MKDX

AEC-Q200
RoHS

High Permeability

LRF462715MKDX

Compared to the conventional "FL-V series", noise removal has improved in the low frequency range as a result of higher impedance characteristics between 150kHz to 1MHz. The FW maintains high performance in the high frequency range, while additionally supporting a wider range of noise frequency.

Part Number	LRF462715MKDX
Status ? In Production：Product is in mass production. NRND：Not recommended for new design. To be Discontinued：We are planning to discontinue production of this item. Discontinued：Production of this product has stopped. Under development ：Products under development. Listed product specifications are subject to change without prior notice.	In Production
Successor Model	-
Previous Part Number ? This is the previous part number system. It may be described in safety standards, but please do not use it when ordering.	F462715MKDX
Series	FW
Core Material	Nanocrystalline
Core Abbreviation	MKDX
Applicable Temperature Range	-40 ～ 130 ℃
Storage Temperature	-40 ～ 130 ℃
Inductance	- - / - A, - kHz (Reference data) - - / - A, - kHz (Reference data)
Inductance Tolerance	- % / - %
Rated Current	- A
Peak Current	- A
D.C.R.	- mΩmax.
Winding(mmφ - lines)	⌀- Wire: - – Plating material: -
Rated Voltage	- V
Inductance Coefficient	124.8μH / 0A, 10kHz 38.7μH / 0A, 100kHz
Rated Current Ampere Turn	-AT
Magnetic Path Length	11.47cm
Cross Sectional Area	1.14cm²
Dimension D1	-mm
Dimension D2	-mm
Dimension W	-mm
Dimension l	-mm
Dimension w	-mm
Dimension h	-mm
Dimension L	-mm
Dimension a	-mm max.
Dimension ⌀D	49.4mm
Dimension ⌀d	22.7mm
Dimension D	-mm
Dimension ⌀ID	-mm
Dimension H	-mm
Dimension W	18mm
Dimension P1	-mm
Dimension P2	-mm
Dimension P3	-mm
Dimension P4	-mm
Dimension P5	-mm
Dimension h1	-
Dimension h2	-
Standard Mounting Direction	-
Case Type Parts Number ? Both coating types (no case) and case types can be used. Case types are recommended when the coils are used in a high-voltage circuit. Please order case types with this parts number.	-
Insulation	Type B
Flame Resistance	UL94V-0
Reference Weight ? This is a representing value calculated from a standard material composition. Note that the reference weights are not considered as guaranteed value.	107 g
Minimum Order Quantity ? This is the packing quantity for standard packing specifications.	72 pcs/Box
Shelf Life	- months
RoHS Compliant ? 10 Restricted Substances 2011/65/EU and (EU) 2015/863	Compliant
AEC-Q200 ? Please refer to AEC-Q 200 for details.	Compliant

AEC-Q200(Automotive Standards)

About Inductor AEC-Q200 Compliance: If you are considering using this product for Automotive use, please contact our sales representative or agency.
We may ask you to change the specifications depending on the application.