Products LineupInductors (Coils/Cores)

Core/Reactor Core TM Series LPT130805N

  • RoHS


Excellent frequency and temperature characteristics. Core loss significantly reduced, allowing small size and less heat in high frequencies.

Part Number LPT130805N
In Production:Product is in mass production.
NRND:Not recommended for new design.
To be Discontinued:We are planning to discontinue production of this item.
Discontinued:Production of this product has stopped.
Under development :Products under development. Listed product specifications are subject to change without prior notice.
In Production
Successor model -
Discontinued Part Number
This is a discontinued part number system.
It may be described in safety standards, but please do not use it when ordering.
Series TM
Core material Amorphous (Non-gap Type)
Core abbreviation N1
Applicable temperature range -40 ~ 130 ℃
Storage temperature -40 ~ 130 ℃
Inductance - - / - A, - kHz (Reference data)
- - / - A, - kHz (Reference data)
Inductance Tolerance - % / - %
Rated current - A
Peak Current - A
D.C.R. - mΩmax.
Winding(mmφ - lines) ⌀- Wire: - – Plating material: -
Rated voltage - V
Inductance Coefficient 0.12μH / 0A, 200kHz
0.07μH / Ampere-Turn A, 200kHz
Rated Current Ampere Turn 75AT
Magnetic Path Length 3.44cm
Cross Sectional Area 0.13cm²
Dimension D1 -mm
Dimension D2 -mm
Dimension W -mm
Dimension l -mm
Dimension w -mm
Dimension h -mm
Dimension L -mm
Dimension a -mm max.
Dimension ⌀D 16mm
Dimension ⌀d 5.8mm
Dimension D -mm
Dimension ⌀ID -mm
Dimension H -mm
Dimension W 7.4mm
Dimension P1 -mm
Dimension P2 -mm
Dimension P3 -mm
Dimension P4 -mm
Dimension P5 -mm
Dimension h1 -
Dimension h2 -
Standard mounting direction -
Case type parts number
Both coating types (no case) and case types can be used.
Case types are recommended when the coils are used in a high-voltage circuit.
Please order case types with this parts number.
Insulation Type B
Flame resistance UL94-0
Reference weight
This is a representing value calculated from a standard material composition.
Note that the reference weights are not considered as guaranteed value.
4 g
Minimum order quantity
This is the packing quantity for standard packing specifications.
900 pcs/Box
Shelf life/MSL - months
RoHS Compliant
10 Restricted Substances
2011/65/EU and (EU) 2015/863
Please refer to AEC-Q 200 for details.

Standard Mounting Direction


Mounting Direction No pedestal Pedestal without pins Pedestal with pins
Vertical N/A N/A N/A
Horizontal N/A N/A N/A

Even if it is not applicable (N/A), it may be applicable depending on the conditions. Please contact us.

Dimension [mm]


Part Numbering System

Part Numbering System

Characteristics data

  • Inductance vs. Frequency Characteristics

  • Core Loss Characteristics

  • D.C. Bias Characteristics AL vs. AT

  • Inductance/Core Loss vs. Temperature Dependance