Products LineupInductors (Coils/Cores)

Core/Reactor Core BM series LPB322015N

  • RoHS

LPB322015N

Large inductance compared to TM Series when electrical load is low. Magnetic flux leakage is small since the core has no gap.

Part number LPB322015N
Status
?
In Production:Product is in mass production.
NRND:Not recommended for new design.
To be Discontinued:We are planning to discontinue production of this item.
Discontinued:Production of this product has stopped.
Under development :Products under development. Listed product specifications are subject to change without prior notice.
In Production
Successor model -
Discontinued parts number
?
This is a discontinued part number system.
It may be described in safety standards, but please do not use it when ordering.
B322015N
Series BM
Core material Amorphous (Non-gap Type)
Core abbreviation XR
Applicable temperature range -40 ~ 130 ℃
Storage temperature -40 ~ 130 ℃
Inductance - - / - A, - kHz (Reference data)
- - / - A, - kHz (Reference data)
Inductance Tolerance - % / - %
Rated current - A
Peak Current - A
D.C.R. - mΩmax.
Winding(mmφ - lines) ⌀- Wire: - – Plating material: -
Rated voltage - V
Inductance Coefficient 0.229μH / 0A, 200kHz
0.091μH / Ampere-Turn A, 200kHz
Rated Current Ampere Turn 350AT
Magnetic Path Length 8.17cm
Cross Sectional Area 0.774cm²
Dimention D1 -mm
Dimention D2 -mm
Dimention W -mm
Dimention l -mm
Dimention w -mm
Dimention h -mm
Dimention L -mm
Dimention a -mm max.
Dimention ⌀D 35.2mm
Dimention ⌀d 17.5mm
Dimention D -mm
Dimention ⌀ID -mm
Dimention H -mm
Dimention W 17.3mm
Dimention P1 -mm
Dimention P2 -mm
Dimention P3 -mm
Dimention P4 -mm
Dimention P5 -mm
Dimention h1 -
Dimention h2 -
Standard mounting direction -
Case type parts number
?
Both coating types (no case) and case types can be used.
Case types are recommended when the coils are used in a high-voltage circuit.
Please order case types with this parts number.
-
Insulation Type B
Flame resistance UL94-0
Reference weight
?
This is a representing value calculated from a standard material composition.
Note that the reference weights are not considered as guaranteed value.
54 g
Minimum order quantity
?
This is the packing quantity for standard packing specifications.
140 pcs/Box
Shelf life/MSL - months
RoHS Compliant
?
10 Restricted Substances
2011/65/EU and (EU) 2015/863
Capable
AEC-Q200
?
Please refer to AEC-Q 200 for details.
-

Standard Mounting Direction

Zoom

Mounting Direction No pedestal Pedestal without pins Pedestal with pins
Vertical N/A N/A N/A
Horizontal N/A N/A N/A

Even if it is not applicable (N/A), it may be applicable depending on the conditions. Please contact us.

Dimention [mm]

Dimention

Part numbering system

Part numbering system

Characteristics data

  • Inductance vs. Frequency Characteristics

  • Core Loss Characteristics

  • D.C. Bias Characteristics AL vs. AT

  • Inductance/Core Loss vs. Temperature Dependance