Products LineupInductors (Coils/Cores)

Core/Reactor Core CM series LNC181210G

  • RoHS

LNC181210G

Miniaturized compared to Ferrite Chokes. High-frequency core loss is reduced compared to Silicon Steel Sheet Chokes. Excellent DC superposition and temperature characteristics compared to Dust-based Chokes. Useful to arrange near other components since direction of magnetic flux leakage is limited to one direction.

Status
?
In Production:Product is in mass production.
NRND:Not recommended for new design.
To be Discontinued:We are planning to discontinue production of this item.
Discontinued:Production of this product has stopped.
Under development :Products under development. Listed product specifications are subject to change without prior notice.
In Production
Successor model -
Part number LNC181210G
Discontinued parts number
?
This is a discontinued part number system.
It may be described in safety standards, but please do not use it when ordering.
C181210G
Series CM
Core material Amorphous (Gap Type)
Core abbreviation G3
Applicable temperature range -40 ~ 130 ℃
Storage temperature -40 ~ 130 ℃
Inductance - - / - A, - kHz (Reference data)
- - / - A, - kHz (Reference data)
Inductance Tolerance - % / - %
Rated current - A
Peak Current - A
D.C.R. - mΩmax.
Winding(mmφ - lines) ⌀- Wire: - – Plating material: -
Rated voltage - V
Inductance Coefficient 0.122μH / 0A, 10kHz
0.116μH / Ampere-Turn A, 10kHz
Rated Current Ampere Turn 150AT
Magnetic Path Length 4.71cm
Cross Sectional Area 0.264cm²
Dimention D1 -mm
Dimention D2 -mm
Dimention W -mm
Dimention l -mm
Dimention w -mm
Dimention h -mm
Dimention L -mm
Dimention a -mm max.
Dimention ⌀D 20.2mm
Dimention ⌀d 8.8mm
Dimention D -mm
Dimention ⌀ID -mm
Dimention H -mm
Dimention W 11.8mm
Dimention P1 -mm
Dimention P2 -mm
Dimention P3 -mm
Dimention P4 -mm
Dimention P5 -mm
Dimention h1 -
Dimention h2 -
Standard mounting direction -
Case type parts number
?
Both coating types (no case) and case types can be used.
Case types are recommended when the coils are used in a high-voltage circuit.
Please order case types with this parts number.
-
Insulation Type B
Flame resistance UL94-0
Reference weight
?
This is a representing value calculated from a standard material composition.
Note that the reference weights are not considered as guaranteed value.
11 g
Minimum order quantity
?
This is the packing quantity for standard packing specifications.
500 pcs/Box
Shelf life/MSL - months
RoHS Compliant
?
10 Restricted Substances
2011/65/EU and (EU) 2015/863
Capable
AEC-Q200
?
Please refer to AEC-Q 200 for details.
-

Standard Mounting Direction

Zoom

Mounting Direction No pedestal Pedestal without pins Pedestal with pins
Vertical N/A N/A N/A
Horizontal N/A N/A N/A

Even if it is not applicable (N/A), it may be applicable depending on the conditions. Please contact us.

Dimention [mm]

Dimention

Part numbering system

Part numbering system

Characteristics data

  • Inductance vs. Frequency Characteristics

  • Core Loss Characteristics

  • D.C. Bias Characteristics AL vs. AT

  • Inductance/Core Loss vs. Temperature Dependance