Products LineupInductors (Coils/Cores)

Toroidal Differential Mode/Boost PFC Choke Coil DM series LHDM002331ARDV0E

  • RoHS

LHDM002331ARDV0E

Excellent frequency and temperature characteristics. Small size compared to Ferrite since saturated magnetic flux density is high, and DC superposition characteristics are better.

Part number LHDM002331ARDV0E
Status
?
In Production:Product is in mass production.
NRND:Not recommended for new design.
To be Discontinued:We are planning to discontinue production of this item.
Discontinued:Production of this product has stopped.
Under development :Products under development. Listed product specifications are subject to change without prior notice.
In Production
Successor model -
Discontinued parts number
?
This is a discontinued part number system.
It may be described in safety standards, but please do not use it when ordering.
DM02331ARDPBF
Series DM
Core material Sendust
Core abbreviation ARD
Applicable temperature range -40 ~ 120 ℃
Storage temperature -40 ~ 120 ℃
Inductance 550 μH / 0 A, 100 kHz (Reference data)
330 μH / 2 A, 100 kHz (Reference data)
Inductance Tolerance -20 % / 20 %
Rated current 2 A
Peak Current - A
D.C.R. 150 mΩmax.
Winding(mmφ - lines) ⌀0.70-1P Wire: PEW – Plating material: Sn-3Ag-0.5Cu
Rated voltage - V
Inductance Coefficient -- / -A, -kHz
-- / -A, -kHz
Rated Current Ampere Turn -AT
Magnetic Path Length -cm
Cross Sectional Area -cm²
Dimention D1 26mm
Dimention D2 27mm
Dimention W 14mm
Dimention l -mm
Dimention w -mm
Dimention h -mm
Dimention L 30mm
Dimention a 2mm max.
Dimention ⌀D -mm
Dimention ⌀d -mm
Dimention D -mm
Dimention ⌀ID -mm
Dimention H -mm
Dimention W -mm
Dimention P1 -mm
Dimention P2 -mm
Dimention P3 -mm
Dimention P4 -mm
Dimention P5 -mm
Dimention h1 -
Dimention h2 -
Standard mounting direction Vertical
Case type parts number
?
Both coating types (no case) and case types can be used.
Case types are recommended when the coils are used in a high-voltage circuit.
Please order case types with this parts number.
-
Insulation Type A
Flame resistance UL94-0
Reference weight
?
This is a representing value calculated from a standard material composition.
Note that the reference weights are not considered as guaranteed value.
16 g
Minimum order quantity
?
This is the packing quantity for standard packing specifications.
200 pcs/Box
Shelf life/MSL 12 months
RoHS Compliant
?
10 Restricted Substances
2011/65/EU and (EU) 2015/863
Capable
AEC-Q200
?
Please refer to AEC-Q 200 for details.
-

Standard Mounting Direction

Zoom

Mounting Direction No pedestal Pedestal without pins Pedestal with pins
Vertical LHDM002331ARDV0E LHDM002331ARDD0E LHDM002331ARDY0E
Horizontal LHDM002331ARDH0E N/A N/A

Even if it is not applicable (N/A), it may be applicable depending on the conditions. Please contact us.

Dimention [mm]

Dimention

Part numbering system

Part numbering system

Characteristics data

  • D.C. Bias Characteristics

  • Core Loss Characteristics