LESM050010P1BV0E - Inductors (Coils/Cores) | Nippon Chemi-Con Corporation

1 Turn Structure Differential Mode a.k.a. Normal Mode Choke Coil SM Series LESM050010P1BV0E

AEC-Q200
RoHS

LESM050010P1BV0E

Low DC resistance since lead wire only passes through the core. The Iron-based Amorphous Core allows stable operation in high-temperature situations. Compatible with automotive. High safety and reliability standards since there are no layer-short circuits and the magnetic flux leakage is very small.

Part Number	LESM050010P1BV0E
Status ? In Production：Product is in mass production. NRND：Not recommended for new design. To be Discontinued：We are planning to discontinue production of this item. Discontinued：Production of this product has stopped. Under development ：Products under development. Listed product specifications are subject to change without prior notice.	In Production
Successor Model	-
Previous Part Number ? This is the previous part number system. It may be described in safety standards, but please do not use it when ordering.	SM50010P1BPBF
Series	SM
Core Material	Amorphous (Non-gap Type)
Core Abbreviation	P1B
Applicable Temperature Range	-40 ～ 150 ℃
Storage Temperature	-40 ～ 150 ℃
Inductance	2.4 μH / 0 A, 20 kHz (Reference data) 1.2 μH / 50 A, 20 kHz (Reference data)
Inductance Tolerance	- % / - %
Rated Current	50 A
Peak Current	- A
D.C.R.	0.4 mΩmax.
Winding(mmφ - lines)	⌀2.0-1P Wire: Tinned Copper Wire – Plating material: Sn-3Ag-0.5Cu
Rated Voltage	- V
Inductance Coefficient	-- / -A, -kHz -- / -A, -kHz
Rated Current Ampere Turn	-AT
Magnetic Path Length	-cm
Cross Sectional Area	-cm²
Dimension D1	24mm
Dimension D2	13mm
Dimension W	26mm
Dimension l	-mm
Dimension w	-mm
Dimension h	-mm
Dimension L	3.8mm
Dimension a	-mm max.
Dimension ⌀D	-mm
Dimension ⌀d	-mm
Dimension D	-mm
Dimension ⌀ID	-mm
Dimension H	-mm
Dimension W	-mm
Dimension P1	-mm
Dimension P2	-mm
Dimension P3	-mm
Dimension P4	-mm
Dimension P5	-mm
Dimension h1	-
Dimension h2	-
Standard Mounting Direction	Vertical
Case Type Parts Number ? Both coating types (no case) and case types can be used. Case types are recommended when the coils are used in a high-voltage circuit. Please order case types with this parts number.	-
Insulation	Type F
Flame Resistance	UL94V-0
Reference Weight ? This is a representing value calculated from a standard material composition. Note that the reference weights are not considered as guaranteed value.	23 g
Minimum Order Quantity ? This is the packing quantity for standard packing specifications.	270 pcs/Box
Shelf Life/MSL	12 months
RoHS Compliant ? 10 Restricted Substances 2011/65/EU and (EU) 2015/863	Compliant
AEC-Q200 ? Please refer to AEC-Q 200 for details.	Compliant

AEC-Q200(Automotive Standards)

About Inductor AEC-Q200 Compliance: If you are considering using this product for Automotive use, please contact our sales representative or agency.
We may ask you to change the specifications depending on the application.