Products LineupInductors (Coils/Cores)

Toroidal Common Mode (Single-phase) Choke Coil FW Series LDFW027282YJUV0E

  • AEC-Q200
  • RoHS
  • High Permeability

LDFW027282YJUV0E

Compared to the conventional "FL-V series", noise removal has improved in the low frequency range as a result of higher impedance characteristics between 150kHz to 1MHz. The FW maintains high performance in the high frequency range, while additionally supporting a wider range of noise frequency.

Part Number LDFW027282YJUV0E
Status
?
In Production:Product is in mass production.
NRND:Not recommended for new design.
To be Discontinued:We are planning to discontinue production of this item.
Discontinued:Production of this product has stopped.
Under development :Products under development. Listed product specifications are subject to change without prior notice.
In Production
Successor Model -
Previous Part Number
?
This is the previous part number system.
It may be described in safety standards, but please do not use it when ordering.
FW27282YJUPBF
Series FW
Core Material Nanocrystalline
Core Abbreviation YJU
Applicable Temperature Range -40 ~ 130 ℃
Storage Temperature -40 ~ 130 ℃
Inductance 9 mH / 0 A, 10 kHz (Reference data)
2.8 mH / 0 A, 100 kHz (Reference data)
Inductance Tolerance - % / - %
Rated Current 27 A
Peak Current - A
D.C.R. 3.1 mΩmax.
Winding(mmφ - lines) ⌀1.7-2P Wire: PEW – Plating material: Sn-3Ag-0.5Cu
Rated Voltage 700 V
Inductance Coefficient -- / -A, -kHz
-- / -A, -kHz
Rated Current Ampere Turn -AT
Magnetic Path Length -cm
Cross Sectional Area -cm²
Dimension D1 48mm
Dimension D2 50mm
Dimension W 32.5mm
Dimension l -mm
Dimension w -mm
Dimension h -mm
Dimension L 20mm
Dimension a 1.5mm max.
Dimension ⌀D -mm
Dimension ⌀d -mm
Dimension D -mm
Dimension ⌀ID -mm
Dimension H -mm
Dimension W -mm
Dimension P1 -mm
Dimension P2 -mm
Dimension P3 -mm
Dimension P4 -mm
Dimension P5 -mm
Dimension h1 -
Dimension h2 -
Standard Mounting Direction Vertical
Case Type Parts Number
?
Both coating types (no case) and case types can be used.
Case types are recommended when the coils are used in a high-voltage circuit.
Please order case types with this parts number.
-
Insulation Type B
Flame Resistance UL94V-0
Reference Weight
?
This is a representing value calculated from a standard material composition.
Note that the reference weights are not considered as guaranteed value.
128 g
Minimum Order Quantity
?
This is the packing quantity for standard packing specifications.
48 pcs/Box
Shelf Life/MSL 12 months
RoHS Compliant
?
10 Restricted Substances
2011/65/EU and (EU) 2015/863
Compliant
AEC-Q200
?
Please refer to AEC-Q 200 for details.
Compliant

AEC-Q200(Automotive Standards)

About Inductor AEC-Q200 Compliance: If you are considering using this product for Automotive use, please contact our sales representative or agency.
We may ask you to change the specifications depending on the application.

Standard Mounting Direction

Zoom

Mounting Direction No pedestal Pedestal without pins Pedestal with pins
Vertical LDFW027282YJUV0E N/A N/A
Horizontal LDFW027282YJUH0E N/A N/A

Even if it is not applicable (N/A), it may be applicable depending on the conditions. Please contact us.

Dimension [mm]

Dimension

Part Numbering System

Part Numbering System

Characteristics Data

  • Inductance vs. Frequency Characteristics

  • Impedance vs. Frequency Characteristics

  • Self-heating vs. Current Characteristics