LDFW025282Y72H0E - Inductors (Coils/Cores) | Nippon Chemi-Con Corporation

Toroidal Common Mode (Three-phase) Choke Coil FW Series LDFW025282Y72H0E

AEC-Q200
RoHS

High Permeability

LDFW025282Y72H0E

Compared to the conventional "FL-V series", noise removal has improved in the low frequency range as a result of higher impedance characteristics between 150kHz to 1MHz. The FW maintains high performance in the high frequency range, while additionally supporting a wider range of noise frequency.

Part Number	LDFW025282Y72H0E
Status ? In Production：Product is in mass production. NRND：Not recommended for new design. To be Discontinued：We are planning to discontinue production of this item. Discontinued：Production of this product has stopped. Under development ：Products under development. Listed product specifications are subject to change without prior notice.	In Production
Successor Model	-
Previous Part Number ? This is the previous part number system. It may be described in safety standards, but please do not use it when ordering.	FW25282Y72PBF
Series	FW
Core Material	Nanocrystalline
Core Abbreviation	Y72
Applicable Temperature Range	-40 ～ 130 ℃
Storage Temperature	-40 ～ 130 ℃
Inductance	9.1 mH / 0 A, 10 kHz (Reference data) 2.8 mH / 0 A, 100 kHz (Reference data)
Inductance Tolerance	- % / - %
Rated Current	25 A
Peak Current	- A
D.C.R.	3.6 mΩmax.
Winding(mmφ - lines)	⌀2.3-1P Wire: PEW – Plating material: Sn-3Ag-0.5Cu
Rated Voltage	500 V
Inductance Coefficient	-- / -A, -kHz -- / -A, -kHz
Rated Current Ampere Turn	-AT
Magnetic Path Length	-cm
Cross Sectional Area	-cm²
Dimension D1	56mm
Dimension D2	56mm
Dimension W	32mm
Dimension l	-mm
Dimension w	-mm
Dimension h	-mm
Dimension L	15mm
Dimension a	1.5mm max.
Dimension ⌀D	-mm
Dimension ⌀d	-mm
Dimension D	-mm
Dimension ⌀ID	-mm
Dimension H	-mm
Dimension W	-mm
Dimension P1	-mm
Dimension P2	-mm
Dimension P3	-mm
Dimension P4	-mm
Dimension P5	-mm
Dimension h1	-
Dimension h2	-
Standard Mounting Direction	Horizontal
Case Type Parts Number ? Both coating types (no case) and case types can be used. Case types are recommended when the coils are used in a high-voltage circuit. Please order case types with this parts number.	-
Insulation	Type B
Flame Resistance	UL94V-0
Reference Weight ? This is a representing value calculated from a standard material composition. Note that the reference weights are not considered as guaranteed value.	160 g
Minimum Order Quantity ? This is the packing quantity for standard packing specifications.	32 pcs/Box
Shelf Life	12 months
RoHS Compliant ? 10 Restricted Substances 2011/65/EU and (EU) 2015/863	Compliant
AEC-Q200 ? Please refer to AEC-Q 200 for details.	Compliant

AEC-Q200(Automotive Standards)

About Inductor AEC-Q200 Compliance: If you are considering using this product for Automotive use, please contact our sales representative or agency.
We may ask you to change the specifications depending on the application.