Products LineupInductors (Coils/Cores)

Toroidal Common Mode (Single-phase) Choke Coil FL-V series LDFL016732V22V0E

  • RoHS
  • High Permeability


Compared to conventional coils, the inductance level has significantly improved, and a higher impedance level has been secured within a wide range of frequencies. WEB LIMITED ITEM. NEW PRODUCT. Item not in Catalog. Please contact us for details.

Part number LDFL016732V22V0E
In Production:Product is in mass production.
NRND:Not recommended for new design.
To be Discontinued:We are planning to discontinue production of this item.
Discontinued:Production of this product has stopped.
Under development :Products under development. Listed product specifications are subject to change without prior notice.
In Production
Successor model -
Discontinued parts number
This is a discontinued part number system.
It may be described in safety standards, but please do not use it when ordering.
Series FL-V
Core material Nanocrystalline
Core abbreviation V22
Applicable temperature range -40 ~ 130 ℃
Storage temperature -40 ~ 130 ℃
Inductance 16 mH / - A, 10 kHz (Reference data)
7.3 mH / - A, 100 kHz (Reference data)
Inductance Tolerance - % / - %
Rated current 16 A
Peak Current - A
D.C.R. 7.9 mΩmax.
Winding(mmφ - lines) ⌀1.9-1P Wire: PEW – Plating material: Sn-3Ag-0.5Cu
Rated voltage 500 V
Inductance Coefficient -- / -A, -kHz
-- / -A, -kHz
Rated Current Ampere Turn -AT
Magnetic Path Length -cm
Cross Sectional Area -cm²
Dimention D1 38mm
Dimention D2 43mm
Dimention W 28.5mm
Dimention l -mm
Dimention w -mm
Dimention h -mm
Dimention L 20mm
Dimention a 1.5mm max.
Dimention ⌀D -mm
Dimention ⌀d -mm
Dimention D -mm
Dimention ⌀ID -mm
Dimention H -mm
Dimention W -mm
Dimention P1 -mm
Dimention P2 -mm
Dimention P3 -mm
Dimention P4 -mm
Dimention P5 -mm
Dimention h1 -
Dimention h2 -
Standard mounting direction Vertical
Case type parts number
Both coating types (no case) and case types can be used.
Case types are recommended when the coils are used in a high-voltage circuit.
Please order case types with this parts number.
Insulation Type B
Flame resistance UL94-0
Reference weight
This is a representing value calculated from a standard material composition.
Note that the reference weights are not considered as guaranteed value.
88 g
Minimum order quantity
This is the packing quantity for standard packing specifications.
48 pcs/Box
Shelf life/MSL 12 months
RoHS Compliant
10 Restricted Substances
2011/65/EU and (EU) 2015/863
Please refer to AEC-Q 200 for details.

Standard Mounting Direction


Mounting Direction No pedestal Pedestal without pins Pedestal with pins
Vertical LDFL016732V22V0E LDFL016732V22D0E LDFL016732V22Y0E
Horizontal LDFL016732V22H0E LDFL016732V22B0E LDFL016732V22W0E

Even if it is not applicable (N/A), it may be applicable depending on the conditions. Please contact us.

Dimention [mm]


Part numbering system

Part numbering system

Characteristics data

  • Inductance vs. Frequency Characteristics

  • Impedance vs. Frequency Characteristics

  • Self-heating vs. Current Characteristics