Products LineupInductors (Coils/Cores)

Toroidal Common Mode (Single-phase) Choke Coil FL-V Series LDFL006102VS-V0E

  • AEC-Q200
  • RoHS
  • High Permeability

LDFL006102VS-V0E

This common mode choke coil uses a nanocrystalline alloy with a high permeability (31,000µ) as its core material. Enabling a high inductance with a small volume and few wraps, this product is ideal for applications focused on size and weight reductions.

Part Number LDFL006102VS-V0E
Status
?
In Production:Product is in mass production.
NRND:Not recommended for new design.
To be Discontinued:We are planning to discontinue production of this item.
Discontinued:Production of this product has stopped.
Under development :Products under development. Listed product specifications are subject to change without prior notice.
In Production
Successor Model -
Previous Part Number
?
This is the previous part number system.
It may be described in safety standards, but please do not use it when ordering.
FL06102VSPBF
Series FL-V
Core Material Nanocrystalline
Core Abbreviation VS
Applicable Temperature Range -40 ~ 130 ℃
Storage Temperature -40 ~ 130 ℃
Inductance 2.3 mH / 0 A, 10 kHz (Reference data)
1 mH / 0 A, 100 kHz (Reference data)
Inductance Tolerance - % / - %
Rated Current 5.5 A
Peak Current - A
D.C.R. 16 mΩmax.
Winding(mmφ - lines) ⌀0.70-1P Wire: PEW – Plating material: Sn-3Ag-0.5Cu
Rated Voltage 250 V
Inductance Coefficient -- / -A, -kHz
-- / -A, -kHz
Rated Current Ampere Turn -AT
Magnetic Path Length -cm
Cross Sectional Area -cm²
Dimension D1 15mm
Dimension D2 16mm
Dimension W 12mm
Dimension l -mm
Dimension w -mm
Dimension h -mm
Dimension L 15mm
Dimension a 1.5mm max.
Dimension ⌀D -mm
Dimension ⌀d -mm
Dimension D -mm
Dimension ⌀ID -mm
Dimension H -mm
Dimension W -mm
Dimension P1 -mm
Dimension P2 -mm
Dimension P3 -mm
Dimension P4 -mm
Dimension P5 -mm
Dimension h1 -
Dimension h2 -
Standard Mounting Direction Vertical
Case Type Parts Number
?
Both coating types (no case) and case types can be used.
Case types are recommended when the coils are used in a high-voltage circuit.
Please order case types with this parts number.
-
Insulation Type B
Flame Resistance UL94V-0
Reference Weight
?
This is a representing value calculated from a standard material composition.
Note that the reference weights are not considered as guaranteed value.
4 g
Minimum Order Quantity
?
This is the packing quantity for standard packing specifications.
200 pcs/Box
Shelf Life/MSL 12 months
RoHS Compliant
?
10 Restricted Substances
2011/65/EU and (EU) 2015/863
Compliant
AEC-Q200
?
Please refer to AEC-Q 200 for details.
Compliant

AEC-Q200(Automotive Standards)

About Inductor AEC-Q200 Compliance: If you are considering using this product for Automotive use, please contact our sales representative or agency.
We may ask you to change the specifications depending on the application.

Standard Mounting Direction

Zoom

Mounting Direction No pedestal Pedestal without pins Pedestal with pins
Vertical LDFL006102VS-V0E N/A N/A
Horizontal LDFL006102VS-H0E N/A N/A

Even if it is not applicable (N/A), it may be applicable depending on the conditions. Please contact us.

Dimension [mm]

Dimension

Part Numbering System

Part Numbering System

Characteristics Data

  • Inductance vs. Frequency Characteristics

  • Impedance vs. Frequency Characteristics

  • Self-heating vs. Current Characteristics