Products LineupInductors (Coils/Cores)

Toroidal Differential Mode/Boost PFC Choke Coil BM Series LBBM010750X8-V0E

  • RoHS

LBBM010750X8-V0E

Large inductance compared to TM Series when electrical load is low. Magnetic flux leakage is small since the core has no gap.

Part Number LBBM010750X8-V0E
Status
?
In Production：Product is in mass production.
NRND：Not recommended for new design.
To be Discontinued：We are planning to discontinue production of this item.
Discontinued：Production of this product has stopped.
Under development ：Products under development. Listed product specifications are subject to change without prior notice.
 In Production
Successor Model -
Previous Part Number
?
This is the previous part number system.
It may be described in safety standards, but please do not use it when ordering.
 BM10750X8PBF
Series BM
Core Material Amorphous (Non-gap Type)
Core Abbreviation X8
Applicable Temperature Range -40 ～ 130 ℃
Storage Temperature -40 ～ 130 ℃
Inductance 170 μH / 0 A, 200 kHz (Reference data)
75 μH / 10 A, 200 kHz (Reference data)
Inductance Tolerance -25 % / 25 %
Rated Current 10 A
Peak Current - A
D.C.R. 17 mΩmax.
Winding(mmφ - lines) ⌀1.1-2P Wire: PEW – Plating material: Sn-3Ag-0.5Cu
Rated Voltage - V
Inductance Coefficient -- / -A, -kHz
-- / -A, -kHz
Rated Current Ampere Turn -AT
Magnetic Path Length -cm
Cross Sectional Area -cm²
Dimension D1 34mm
Dimension D2 34mm
Dimension W 25.5mm
Dimension l -mm
Dimension w -mm
Dimension h -mm
Dimension L 30mm
Dimension a 1.5mm max.
Dimension ⌀D -mm
Dimension ⌀d -mm
Dimension D -mm
Dimension ⌀ID -mm
Dimension H -mm
Dimension W -mm
Dimension P1 -mm
Dimension P2 -mm
Dimension P3 -mm
Dimension P4 -mm
Dimension P5 -mm
Dimension h1 -
Dimension h2 -
Standard Mounting Direction Vertical
Case Type Parts Number
?
Both coating types (no case) and case types can be used.
Case types are recommended when the coils are used in a high-voltage circuit.
Please order case types with this parts number.
 -
Insulation Type B
Flame Resistance UL94V-0
Reference Weight
?
This is a representing value calculated from a standard material composition.
Note that the reference weights are not considered as guaranteed value.
 60 g
Minimum Order Quantity
?
This is the packing quantity for standard packing specifications.
 132 pcs/Box
Shelf Life 12 months
RoHS Compliant
?
10 Restricted Substances
2011/65/EU and (EU) 2015/863
 Compliant
AEC-Q200
?
Please refer to AEC-Q 200 for details.
 -

Standard Mounting Direction

Zoom

Mounting Direction No pedestal Pedestal without pins Pedestal with pins
Vertical LBBM010750X8-V0E LBBM010750X8-D0E LBBM010750X8-Y0E
Horizontal LBBM010750X8-H0E N/A N/A

Even if it is not applicable (N/A), it may be applicable depending on the conditions. Please contact us.

Dimension [mm]

Dimension

Part Numbering System

Part Numbering System

Characteristics Data

  • D.C. Bias Characteristics