Supercapacitors DLCAP™ 2 Cells Module (Lead type) MDKA2R5T500PN1111A
- RoHS2
- Adhesive Application Process
- Downsizing
- One-Touch Attachment
Mounting for 2 Supercapacitors. A snap-fit design enables one-touch circuit board attachment.
Contributes to power supply circuit downsizing by eliminating the need for adhesive and enabling the mounting of compact parts in the space below the Supercapacitor.
* Contact us if you are considering element changes or use in vehicles.
| Part Number | MDKA2R5T500PN1111A |
|---|---|
| Dimensions W | 42.3mm |
| Dimensions D | 58.4mm |
| Dimensions H | 27.9mm |
Reference Weight
|
47g |
| Nunber of Capacitors | 2pcs |
RoHS Compliant
|
Compliant |
* This holder can be configured in 2 series/2 parallel according to the customer's board pattern.
* 2 When using as a series, provide a balance resistor.
Element Specifications
| Device Part Number use | DDKA2R5ELL500KM50S |
|---|
Dimension [mm]
![Dimension [mm]](/products/edlc/images/MDKA2R5T500PN1111A_1.svg)
Contributes to eliminating the circuit boards size reduction and adhesive application process
- Effective use of space under the Supercapacitor enables space savings on circuit boards.
- Eliminating the need for adhesive reduces steps and resolves the issue of declining adhesiveness due to aging.
- Compatible with products from ⌀18×50L.
- Resin pins with a snap-fit structure enable one-touch attachment of holders.
* Not available for vibration resistance warranty. Contact us if you have vibration resistance requirements.
-
- Secured 4.0 mm of space on the bottom side.
- Uses MLCC and other SMD parts to achieve space savings.
-
- Uses resin hooks on the sides to lock into position.
- Compatible with products from ⌀18×50L.
-
- A snap-fit design enables one-touch circuit board attachment.