FAQ/Contact usProducts FAQs

Surface mount-type aluminum electrolytic capacitor mount types (difference between terminal codes A and G)

We offer two types of mounts for surface mount-type aluminum electrolytic capacitors, a standard type and a product with improved vibration resistance.

Products with improved vibration resistance are the type that hold the side of the case with a mount, and feature auxiliary terminals on the bottom.
Standard types and products with improved vibration resistance can be differentiated by the eighth digit of the part number.
 
 

Type standard structure vibration-resistance products
Appearance 通常台座 耐振動台座
mount 通常品の台座部分 耐振動品の台座部分
bottom 通常品の底面 耐振動品の底面
vibration resistance guarantee
  • Vibration acceleration: Max 98m/s2
  • Total amplitude: 1.5mm
  • Vibration frequency range: 10-55Hz
  • Test time: 2 hours each for X, Y, Z directions, total 6 hours
  • Vibration acceleration: Max 294m/s2
  • Total amplitude: 5mm
  • Vibration frequency range: 10-2000Hz
  • Test time: 2 hours each for X, Y, Z directions, total 6 hours
  • Solder paste thickness: 200um
parts number example EMHS630ARA561MMH0S EMHS630GRA561MMH0S
Product electrical specifications
See the terminal code ARA product data for electrical characteristics.
About mounting specifications
Pages for each parts number contain only the parts numbers for standard mounts.
Check the catalog for information on recommended land patterns and reflow conditions.

If you have any questions or inquiries that do not apply to the above, please contact us at the following address.

Products Inquiries