NIPPON CHEMI-CON CORPORATION

New/Under Development Series

Series	Category	Type	Characteristic	Catalog (Full page) *
PNA	Polymer		The Super long life of 12,000 hours at 125°C is achieved by using conductive polymer and highly airtight sealing technology. It is ideal for 5G mobile base stations that require ultra-low ESR high-density mounting and 24-hour operation in environments with high ambient temperatures. The ultra-low ESR of conductive polymer can be used for processor peripheral circuits used in harsh environments.
PXG	Polymer		25V rating voltage products have been added with approximately 20 to 40% higher capacitance. It has been used new high gain electrode foils and technology to uniformly form of conductive polymers. The PXG series is a conductive polymer type product with high voltage rating range (16 to 25V) and high capacitance. They are suitable for DC input circuit and USB Power Delivery application.
KHU	E-Cap		We have a lineup of products with a maximum rating voltage of 500 V and a product height of 80 mm for data center servers and new energy storage devices that require high voltage and large capacity. New electrode foils have been developed and adopted to increase the capacitance of high-voltage products. Guaranteed operating life is 3,000 hours at 105 ° C.
LHU	E-Cap		We have a lineup of products with a maximum rating voltage of 500 V and a product height of 80 mm for data center servers and new energy storage devices that require high voltage and large capacity. New electrode foils have been developed and adopted to increase the capacitance of high-voltage products. Guaranteed operating life is 5,000 hours at 105 ° C.
LXU	E-Cap		We have created a lineup of DC link capacitors for servo amplifiers, general-purpose inverters, motor drives, that require large capacity and high ripple current. By adopting a new electrode foil and optimizing the design, we have achieved both higher capacity and higher ripple current than conventional products (LXA series). It is suitable for frequently change of regenerative voltage from AC servo amplifier and inverter control.
DKG	EDLC		High withstand voltage and long life series. Guarantees 2.7V and 2,000 hrs (2.7V 65℃/2.5V 70℃). Higher rated voltage and a maximum 20% smaller size than conventional 2.5V products, contributing to a reduction in mounting volume.	Included
DKH	EDLC		We have achieved high heat resistance and miniaturization in addition to high voltage by renewing the material composition. As the voltage increases, the amount of energy per cell increases, and the system can be made smaller and lighter by reducing the number of uses.
KA	Coil		The KA Series are a surface-mount type (SMD) coil for normal mode noise countermeasures. Created using amorphous alloy material in a 1-turn structure, the extremely low DC resistance allows the inductor to handle large currents. Supports 150℃ and achieves AEC-Q200 compliance.	Included

Please contact us for mass production schedule and samples.
The information and products specifications are subject to change without notice.
PDF files for product specifications of products in preparation for the product search feature can be opened by clicking on the series name.