News

New/Under Development Series

Mar. 04, 2024

New/Under Development Series

Series Category Type Characteristic Catalog
(Full page) *
PNA  Polymer Hybrid capacitor The Super long life of 12,000 hours at 125°C is achieved by using conductive polymer and highly airtight sealing technology. It is ideal for 5G mobile base stations that require ultra-low ESR high-density mounting and 24-hour operation in environments with high ambient temperatures.
The ultra-low ESR of conductive polymer can be used for processor peripheral circuits used in harsh environments.
PDF
PXG  Polymer Hybrid capacitor 25V rating voltage products have been added with approximately 20 to 40% higher capacitance. It has been used new high gain electrode foils and technology to uniformly form of conductive polymers. The PXG series is a conductive polymer type product with high voltage rating range (16 to 25V) and high capacitance. They are suitable for DC input circuit and USB Power Delivery application. PDF
KHU  E-Cap Snap-In type We have a lineup of products with a maximum rating voltage of 500 V and a product height of 80 mm for data center servers and new energy storage devices that require high voltage and large capacity. New electrode foils have been developed and adopted to increase the capacitance of high-voltage products.
Guaranteed operating life is 3,000 hours at 105 ° C.
PDF
LHU  E-Cap Snap-In type We have a lineup of products with a maximum rating voltage of 500 V and a product height of 80 mm for data center servers and new energy storage devices that require high voltage and large capacity. New electrode foils have been developed and adopted to increase the capacitance of high-voltage products.
Guaranteed operating life is 5,000 hours at 105 ° C.
PDF
KRB  E-Cap Snap-In type Achieved reduced ESR of high frequency (kHz range) and improved high frequency ripple current capability by developing and adopting a new electrode.
Suitable for high frequency drive power conversion system applications.
EX. Solar power generator with power storage (converter for power storage).
Guaranteed  operating life is 3,000 hours at 105 ° C.
Included
LRB  E-Cap Snap-In type Achieved reduced ESR of high frequency (kHz range) and improved high frequency ripple current capability by developing and adopting a new electrode.
Suitable for high frequency drive power conversion system applications.
EX. Solar power generator with power storage (converter for power storage).
Guaranteed  operating life is 5,000 hours at 105 ° C.
Included
DKG  EDLC EDLC DKG series High withstand voltage and long life series. Guarantees 2.7V and 2,000 hrs (2.7V 65℃/2.5V 70℃). Higher rated voltage and a maximum 20% smaller size than conventional 2.5V products, contributing to a reduction in mounting volume. PDF
DKH  EDLC EDLC DKH series We have achieved high heat resistance and miniaturization in addition to high voltage by renewing the material composition. As the voltage increases, the amount of energy per cell increases, and the system can be made smaller and lighter by reducing the number of uses. PDF
KA  Coil Coil KA series The KA Series are a surface-mount type (SMD) coil for normal mode noise countermeasures. Created using amorphous alloy material in a 1-turn structure, the extremely low DC resistance allows the inductor to handle large currents. Supports 150℃ and achieves AEC-Q200 compliance. Included
FW  Coil Coil FW series Compared to the conventional "FL-V series", noise removal has improved in the low frequency range as a result of higher impedance characteristics between 150kHz to 1MHz. The FW maintains high performance in the high frequency range, while additionally supporting a wider range of noise frequency. Included
SV  Varistor Varistor SV series This flame-retardant and dispersal-resistant varistor is coated with a flame-retardant resin.
We added a small-size product with an element diameter of ⌀5. The product is ideal for use in low-power devices that require resistance to heat and weather.
Included
NTF  MLCC SMD MLCC This SMD type ceramic capacitor uses a resin on its external electrodes. The flexibility of the resin electrodes alleviates board stress and helps reduce cracking.
We added a product with a capacitance tolerance of ±10% (tolerance symbol: K).
Included
NTS  MLCC SMD MLCC This product is a general-purpose SMD type ceramic capacitor. We specialize in large sizes of 1206(inch)/3216(mm) and above and covers the capacitance range that can be used for power source smoothing.
We added a product with a capacitance tolerance of ±10% (tolerance symbol: K).
Included

Please contact us for mass production schedule and samples.
The information and products specifications are subject to change without notice.
PDF files for product specifications of products in preparation for the product search feature can be opened by clicking on the series name.