Products LineupAluminum Electrolytic Capacitors

105℃ SMD Aluminum Electrolytic Capacitors MZF Series EMZF500ARA101MJA0G

  • Solvent Resistance
  • RoHS
  • Long Life
  • Low Impedance
  • Power Supply Smoothing/General Electronic Equipment etc

EMZF500ARA101MJA0G

Suitable for applications requiring long life and low impedance.

Part Number EMZF500ARA101MJA0G
Status
?
In Production：Product is in mass production.
NRND：Not recommended for new design.
To be Discontinued：We are planning to discontinue production of this item.
Discontinued：Production of this product has stopped.
Under development ：Products under development. Listed product specifications are subject to change without prior notice.
 In Production
Successor Model -
Series MZF
Polarity Polar
Category Temperature Range -25～105 ℃
Temperature Characteristics, Case Code (inch/mm) -
Rated Voltage 50 Vdc
Capacitance 100 µF
Capacitance Tolerance -20～20%(M) / 20℃, 120Hz
Internal Resistance (Typ.) mΩ
Internal Resistance (Max.) mΩ
Dimensions ⌀ D 10mm
Dimensions H mm
Dimensions L 10mm
Rated Ripple Current 670mArms / 105℃ / 100kHz
Rated Ripple Voltage - Vac / -Hz
Impedance 0.35Ω max / 20℃ / 100kHz
ESR -
Leakage Current 50 μA max / 20℃, after 2 minutes
Dissipation Factor (tanδ) 0.14 max / 20℃, 120Hz
Max. Charging and Discharging Current - Arms / -Hz
Number of Charging/Discharging Cycles - × 104 times
Endurance Temperature/Time/Overload 105℃ / 10000hrs / DC
Shelf Life Temperature/Time 105℃ / 1000hrs
Terminal Coating Sn-Bi
Elements -
Reference Weight
?
This is a representing value calculated from a standard material composition.
Note that the reference weights are not considered as guaranteed value.
 1.4g
Minimum Order Quantity
?
This is the packing quantity for standard packing specifications.
 500 pcs
RoHS Compliant
?
10 Restricted Substances
2011/65/EU and (EU) 2015/863
 Compliant
AEC-Q200
?
Please refer to AEC-Q 200 for details.
 -

Rated Ripple Current Multipliers

Zoom

Frequency Multipliers
Frequency [Hz]1201k10k100k
Multipliers0.400.750.901.00

Dimension [mm]

Dimension

The recommended land pattern can be checked in the PDF file titled "Recommended Soldering Conditions, Land Dimensions of SMD Type" or in the CAD file "Footprint".

Part Numbering System

Part Numbering System