Products LineupConductive Polymer Aluminum Solid Capacitors

105℃ SMD Conductive Polymer Aluminum Solid Capacitors PXJ Series APXJ200ARA151MF61G

  • Solvent Resistance
  • RoHS
  • Super Low ESR
  • Long Life
  • High Ripple
  • Halogen Free
  • PC/Mother Board etc

APXJ200ARA151MF61G

Part Number APXJ200ARA151MF61G
Status
?
In Production：Product is in mass production.
NRND：Not recommended for new design.
To be Discontinued：We are planning to discontinue production of this item.
Discontinued：Production of this product has stopped.
Under development ：Products under development. Listed product specifications are subject to change without prior notice.
 In Production
Successor Model -
Series PXJ
Polarity Polar
Category Temperature Range -55～105 ℃
Temperature Characteristics, Case Code (inch/mm) -
Rated Voltage 20 Vdc
Capacitance 150 µF
Capacitance Tolerance -20～20%(M) / 20℃, 120Hz
Internal Resistance (Typ.) mΩ
Internal Resistance (Max.) mΩ
Dimensions ⌀ D 6.3mm
Dimensions H mm
Dimensions L 5.8mm
Rated Ripple Current 3300mArms / 105℃ / 100kHz
Rated Ripple Voltage - Vac / -Hz
Impedance
ESR 23mΩ max / 20℃ / 100k to 300kHz
Leakage Current 600 μA max / 20℃, after 2 minutes
Dissipation Factor (tanδ) 0.12 max / 20℃, 120Hz
Max. Charging and Discharging Current - Arms / -Hz
Number of Charging/Discharging Cycles - × 104 times
Endurance Temperature/Time/Overload 105℃ / 15000hrs / DC
Shelf Life Temperature/Time -℃ / -hrs
Terminal Coating Sn-Bi
Elements -
Reference Weight
?
This is a representing value calculated from a standard material composition.
Note that the reference weights are not considered as guaranteed value.
 0.33g
Minimum Order Quantity
?
This is the packing quantity for standard packing specifications.
 1000 pcs
RoHS Compliant
?
10 Restricted Substances
2011/65/EU and (EU) 2015/863
 Compliant
AEC-Q200
?
Please refer to AEC-Q 200 for details.
 -

Rated Ripple Current Multipliers

Zoom

Frequency Multipliers
Frequency [Hz]1201k10k50k100k300k500k
Multipliers0.050.300.550.701.001.001.00

Dimension [mm]

Dimension

The recommended land pattern can be checked in the PDF file titled "Recommended Soldering Conditions, Land Dimensions of SMD Type" or in the CAD file "Footprint".

Part Numbering System

Part Numbering System