FAQ/Contact usProducts FAQs

Multilayer Ceramic Capacitor Rated Ripple Current

We stipulate the rated ripple current values for our multilayer ceramic capacitors. The frequency range is 10 kHz to 1 MHz (the sine wave and ripple current Vp-p should be within the rated voltage). Please consult us before using outside of this frequency range.

When used in an AC voltage circuit or pulse voltage circuit, the flow of AC current or pulse current will cause the capacitor to generate heat inside itself. When installed, the heat generated by the capacitor will differ depending on the type of circuit board or the state of components mounted nearby. When using, please ensure that it does not exceed our stipulated ripple current value. Please consult us if there is a lot of heat generated.
Make an inquiry concerning multilayer ceramic capacitor rated ripple current
Tags
frequencycharacteristics

If you have any questions or inquiries that do not apply to the above, please contact us at the following address.

Products Inquiries