Products LineupAluminum Electrolytic Capacitors

Horizontal Capacitor Holder EKXJ451E151M45X1MA

  • RoHS2
  • Eliminating the Adhesive Application Process
  • Downsizing
  • For Industrial Equipment

EKXJ451E151M45X1MA

Product developed to bring high added value to consumer and industrial devices.
Contributes to power supply circuit downsizing by eliminating the need for adhesive and enabling the mounting of compact parts in the space below the capacitor.
* Contact us if you are considering element changes or use in vehicles.

Holder Specifications

Part Number EKXJ451E151M45X1MA
Dimensions W 23.5mm
Dimensions D 52.8mm
Dimensions H 25mm
Reference Weight
?
This is a representing value calculated from a standard material composition.
Note that the reference weights are not considered as guaranteed value.
 23g
Nunber of Capacitors 1pcs
Housing Material PPS-GF40% (UL94V-0)
Auxiliary Terminals Sn Plating Copper Covered Steel ⌀1.0 Number of Pins:4
Minimum Order Quantity 120pcs
RoHS Compliant
?
10 Restricted Substances
2011/65/EU and (EU) 2015/863
 Compliant

Element Specifications

Device Part Number use EKXJ451EBC151MM45S
Polarity Polar
Category Temperature Range -40～105 ℃
Rated Voltage 450 Vdc
Capacitance 150 µF
Capacitance Tolerance -20～20%(M) / 20℃, 120Hz
Dimensions⌀ D 18mm
Dimensions L 45mm
Rated Ripple Current 1000mArms / 105℃ / 120Hz
Leakage Current 2800 μA max / 20℃, after 1 minutes
1370 μA max / 20℃, after 5 minutes
Dissipation Factor (tanδ) 0.24 max / 20℃, 120Hz
Endurance Temperature/Time/Overload 105℃ / 12000hrs / DC+Ripple
Shelf Life Temperature/Time 105℃ / 1000hrs
Terminal Coating Sn
Reference Weight
?
This is a representing value calculated from a standard material composition.
Note that the reference weights are not considered as guaranteed value.
 20g
RoHS Compliant
?
10 Restricted Substances
2011/65/EU and (EU) 2015/863
 Compliant

Dimension [mm]

Dimension [mm]

Contributes to eliminating the power supply size reduction and adhesive application process

  • Effective use of space under the capacitor enables space savings on circuit boards
  • Eliminating the need for adhesive reduces steps and resolves the issue of declining adhesiveness due to aging
  • Compatible with products from ⌀18×30 to 50L
  • Corrected the capacitor terminal position for easy circuit board mounting

* Not available for vibration resistance warranty. Contact us if you have vibration resistance requirements.

  • Product Features 1

    • Secured 3.5mm of space on the bottom side
    • Uses MLCC and other SMD parts to achieve space savings

  • Product Features 2

    • Uses resin hooks on the sides to lock into position
    • Compatible with products from ⌀18×30 to 50L

  • Product Features 3

    • Corrected lead line position to improve circuit board mounting