Products LineupAluminum Electrolytic Capacitors

105℃ SMD Aluminum Electrolytic Capacitors MLF Series EMLF100ARA330ME73G

  • Solvent Resistance
  • RoHS
  • Long Life
  • Power Supply Smoothing/General Electronic Equipment etc

EMLF100ARA330ME73G

This product is discontinued. Please consider switching to a different product.

Part Number EMLF100ARA330ME73G
Status
?
In Production：Product is in mass production.
NRND：Not recommended for new design.
To be Discontinued：We are planning to discontinue production of this item.
Discontinued：Production of this product has stopped.
Under development ：Products under development. Listed product specifications are subject to change without prior notice.
 DiscontinuedSearch for alternatives
Successor Model -
Series MLF
Polarity Polar
Category Temperature Range -25～105 ℃
Temperature Characteristics, Case Code (inch/mm) -
Rated Voltage 10 Vdc
Capacitance 33 µF
Capacitance Tolerance -20～20%(M) / 20℃, 120Hz
Internal Resistance (Typ.) mΩ
Internal Resistance (Max.) mΩ
Dimensions ⌀ D 5mm
Dimensions H mm
Dimensions L 7mm
Rated Ripple Current 35mArms / 105℃ / 120Hz
Rated Ripple Voltage - Vac / -Hz
Impedance
ESR -
Leakage Current 9.9 μA max / 20℃, after 2 minutes
Dissipation Factor (tanδ) 0.28 max / 20℃, 120Hz
Max. Charging and Discharging Current - Arms / -Hz
Number of Charging/Discharging Cycles - × 104 times
Endurance Temperature/Time/Overload 105℃ / 10000hrs / DC
Shelf Life Temperature/Time 105℃ / 1000hrs
Terminal Coating Sn-Bi
Elements -
Reference Weight
?
This is a representing value calculated from a standard material composition.
Note that the reference weights are not considered as guaranteed value.
 0.31g
Minimum Order Quantity
?
This is the packing quantity for standard packing specifications.
 1000 pcs
RoHS Compliant
?
10 Restricted Substances
2011/65/EU and (EU) 2015/863
 Compliant
AEC-Q200
?
Please refer to AEC-Q 200 for details.
 -

Rated Ripple Current Multipliers

Zoom

Frequency Multipliers
Frequency [Hz]1201k10k100k
Multipliers1.001.051.081.08

Dimension [mm]

Dimension

The recommended land pattern can be checked in the PDF file titled "Recommended Soldering Conditions, Land Dimensions of SMD Type" or in the CAD file "Footprint".

Part Numbering System

Part Numbering System