Conductive Polymer Hybrid Aluminum Electrolytic Capacitors HXJ Series - New Sizes Developed - A maximum 1.4 times higher capacitance and 1.7 times higher ripple capability
May. 17, 2022 RELEASE
Press Release
Nippon Chemi-Con Corporation
May 17, 2022
May 17, 2022
Nippon Chemi-Con has developed and added new sizes （⌀10×12.5L, ⌀10×16.5L） to conductive polymer hybrid aluminum electrolytic capacitors HXJ Series. The Series is in mass production for the automotive electronics, industrial equipment and communication base station markets which require high reliability.
We have realized a maximum 1.4 times higher capacitance and 1.7 times higher ripple current capability compared to products of the same size (⌀10×12.5L) while maintaining high reliability (HXC Series: 4,000 hours at 125°C/2,000 hours at 85°C85%RH). We have also added the ⌀10×16.5L size which has a longer length as well as further increased capacitance and ripple current capability. This will reduce the number of capacitors required and contribute to the weight and size reduction of applications.
Technical Features
Conductive polymer hybrid aluminum electrolytic capacitors use conductive polymer and liquid electrolyte for electrolytes. This achieves oxide layer repairability due to the liquid electrolyte as well as low ESR characteristics and remarkable heat resistance due to the conductive polymer. These characteristics have supported the development of high withstand voltage products with low ESR and high reliability.The HXJ Series optimizes counter electrode foil by adopting our proprietary high capacitance foil for the anode foil. We have achieved higher capacitance and ripple current capability while maintaining high reliability by adopting the above technology and increasing the length of our existing ⌀10×10L size product.
Specifications of Newly Added Products
- Category temperature range: -55°C to +125°C
- Rated voltage range: 25V to 63V
- Capacitance range: 120µF to 1,000µF （capacitance tolerance ±20％）
- Case sizes: ⌀10.0mm×12.5mmL, ⌀10.0mm×16.5mmL
- Endurance: 4,000 hours at 125°C
- Moisture resistance: 2,000 hours at 85°C85％RH
Samples and Mass Production
- Samples: July 2022
- Mass production: September 2022
Production Sites
- ⌀10×12.5L： Chemi-Con East Japan Corp. Miyagi Plant
- ⌀10×16.5L： Chemi-Con Yamagata Corp. Yonezawa Plant
List of Standard Products
| Size ⌀D×L [mm] |
Rated voltage [Vdc] |
Cap. [μF/120Hz] |
Endurance [hrs.] 125℃ |
ESR [mΩmax/100kHz] |
Rated ripple current [mArms/100kHz] |
|||
|---|---|---|---|---|---|---|---|---|
| HXC | HXJ | HXC | HXJ | HXC | HXJ | |||
| 10.0×12.5 | 25 | 470 | 680 | 4,000 | 16 | 15 | 2,500 | 3,700 |
| 35 | 330 | 470 | 17 | 16 | 2,400 | 3,600 | ||
| 50 | 150 | 180 | 19 | 19 | 2,250 | 3,300 | ||
| 63 | 100 | 120 | 22 | 19 | 2,100 | 3,300 | ||
| 10.0×16.5 | 25 | - | 1,000 | 4,000 | - | 11 | - | 4,300 |
| 35 | - | 680 | - | 11 | - | 4,300 | ||
| 50 | - | 270 | - | 13 | - | 4,200 | ||
| 63 | - | 180 | - | 15 | - | 4,100 | ||
Product Appearance
